|
ANGELO
JOHN VARDOUNIOTIS
Born 18 January 1967)
EDUCATION
- 1988
3 months Industrial Training with the Bridge Branch of the Roads
and Traffic Authority.
- 1989
Obtained Bachelor Of Engineering Degree, Civil Engineering,
University of New South Wales. Majored in structures and construction.
EMPLOYMENT
- 1990
to 1998 Senior Project Engineer with Kneebone & Beretta
Consulting Engineers Pty. Limited, Parramatta.
- Duties
include the following:-
Reports
Preparation
of written reports for private home/property owners, body corporates
and/or building managing and real estate agents. Reports covered
all types of building structures from residential to commercial
and industrial buildings. Advice for building damage/defects
or capacity of existing structures to carry additional loading.
Provision
of pre-purchase and/or pre-sale reports on all types of building
structures.
Provision
of reports on defective residential building design/construction
for the Department of Fair Trading.
Provision
of reports and specifications for the testing of structures
such as pool fences, roof sheeting and existing reinforced concrete
structures.
Reports
followed by appearance in Law Courts as an expert witness has
been provided for various legal firms for projects ranging from
residential to large warehouse buildings.
Design
and Analysis
Analysis and/or design of new or existing;
Residential
concrete slabs, footings, retaining walls, carports, awnings
and swimming pools.
Residential
floor and roof framing.
Reinforced
concrete or structural steel warehouses, office buildings and
multi storey home unit building developments.
Reinforced
concrete tilt-up wall design including preparation of workshop
details.
Stormwater
drainage and detention systems for residential to medium density
townhouse/villa/unit developments.
Foundation
design for all building types.
Steel
poles and towers.
Aluminium
structures.
Brick
structures.
Timber
structures.
Construction
Supervision of a wide variety of building structures including
the following;
Inspection
of bored cast in situ concrete piers, grout injected piling,
underpinning, shoring systems and general foundation works.
Inspection
of reinforcing steel for concrete slabs on ground and pavements,
suspended concrete transfer slabs and decks and formwork systems.
Inspection
of structural steel and timber framed warehouse structures.
Certification
of residential timber floor, wall and roof framing.
Monitoring
of general building works from residential to industrial buildings
for independent quality assurance and contract administration
purposes.
- 1999
Appointed Director of Kneebone & Beretta Consulting Engineers
Pty Ltd and Compudraft Pty Ltd
ADDITIONAL EXPERIENCE
- 1990
to 1992 Checking engineer for Parramatta Council.
- 1992
to present Checking engineer for Holroyd City Council.
- 1992
to present Checking engineer and consultant to Hornsby Shire
Council.
PROFESSIONAL
DEVELOPMENT
- September
1991 Attendance at a seminar on report writing by Engineers
Education Australia.
- February
1992 Field trip study of tilt-up construction at Arndell Park,
Sydney.
- November
1993 Attendance at a seminar on building movements by the Association
of Consulting Structural Engineers.
- September
1994 Attendance at a seminar on Residential Slabs and Footings
New 1995 Code Draft by The Cement and Concrete Association of
Australia.
- August
1995 Attendance at a seminar on Building Movements by the Association
of Consulting Structural Engineers.
- October
1996 Attendance at seminar on Design in Glass by the Association
of Consulting Structural Engineers.
- Attendance
at a 2 day Cement and Concrete Technology course by the Cement
and Concrete Association of Australia.
- April
1997 Attendance at a Fibres in Concrete seminar by the Cement
and Concrete Association of Australia.
- Attendance
at a Domestic Paving Seminar by the Cement and Concrete Association
of Australia and the Concrete Institute of Australia.
- December
1997 Attendance at the 15th Australasian Conference on the Mechanics
of Structures and Materials at Melbourne University.
- November
1998 Attendance at Standards Australia Workshop on AS2870-1997
Residential Slabs and Footings Code.
- February
1999 Attendance at Engineering Systems Workshop on Microstran
3D Version 6.5 structural analysis software.
- March
1999 Attendance at Standards Australia Seminar on the Cold Form
Structures Code AS/NZS4600.
- March
1999 Attendance at a Seminar on Designing Long Life Concrete
Structures by the Australian Stainless Steel Development Association.
|
